Estimate runtime for a measured water volume

Turn a measured flow rate and a chosen water volume into run minutes.

By CalcForge ·

Method

Divide target litres by the measured litres per minute. Use the flow with every attachment in the intended position and test again if pressure changes.

Worked example

Delivering 90 L at 12 L/min takes about 7.5 minutes.

What to check

Elapsed time says how much came out. Positioning and runoff determine how much stays in the target area.

Use the field calculator for the rectangular footprint, then apply this guide’s method to the result.

Open the field area calculator ↗