Estimate total water delivered by a drip zone

Combine the measured output of different emitter groups over one runtime.

By CalcForge ·

Method

Count emitters by flow rate. Multiply each group size by its measured typical L/h, sum the rates, then multiply by runtime in hours.

Worked example

Eight 2 L/h emitters and four 1 L/h emitters deliver an estimated 15 L over 45 minutes.

What to check

Individual output can change with pressure. Use field readings if you need a reliable estimate.

Use the field calculator for the rectangular footprint, then apply this guide’s method to the result.

Open the field area calculator ↗

Further reading: University of Minnesota Extension guide to auditing irrigation