Flooring for a 12×12 ft room

Estimate flooring for a 12×12 ft room. Start with 144 square feet and enter the box coverage and cutting allowance for your layout.

Enter measurements

Result

Enter measurements to calculate a result.

Working on a project? Open the Flooring & Tile Planner.

How it works

In a 12 ft square room, mark the centreline if you plan a centred tile pattern. Check the border width on both walls before deciding whether full or cut pieces start the first row.

Mark the planned plank or tile direction on a sketch of this 12 by 12 ft room. Mark where joints need to avoid a doorway and where a leftover cut can be reused. That is a better starting point for selecting an allowance than choosing a percentage without seeing the layout. The 10% in the example is a scenario you can replace.

Check whether the supplier sells only full cartons and whether the coverage reflects the finished joint dimensions. For the example, 8 cartons arrive as 176 square feet of stock. Keep the stock total separate from the 144 square feet of finished room area when comparing different products or box sizes.

If the drawing is metric, convert the room dimensions to feet or convert the product label to square feet first. Use the same area unit on both sides of the division. For a room that tapers, record the separate floor sections and ask the installer which boundary to use for ordering.

Formula

Area = length × width. Adjusted area = area × (1 + allowance ÷ 100). Boxes = round adjusted area ÷ coverage per box up to a whole box.

Worked example

12 × 12 ft with 22 sq ft per box

The rectangle covers 144 sq ft. Adding 10% gives 158.4 sq ft. Divide by the 22 sq ft printed on each box and round up to 8 boxes. Those boxes cover 176 sq ft, leaving 17.6 sq ft above the waste-adjusted target.

Frequently asked questions

How many boxes for a 12 by 12 room?

The rectangle covers 144 sq ft. Adding 10% gives 158.4 sq ft. Divide by the 22 sq ft printed on each box and round up to 8 boxes. Those boxes cover 176 sq ft, leaving 17.6 sq ft above the waste-adjusted target.

How do I measure the 12 ft side?

Measure the clear finished floor between the two edges where the material starts and stops. Repeat the measurement at both ends of the opposite walls if the room might be out of square.

Which box coverage should I use?

Enter your own product label in square feet per box. For the example, 22 sq ft is an assumption. A smaller box gives a higher whole-box count even when net room area is unchanged.

How should I treat a recess or threshold?

In a 12 ft square room, mark the centreline if you plan a centred tile pattern. Check the border width on both walls before deciding whether full or cut pieces start the first row. If the recess will use the same material, estimate its area separately and add it before applying the allowance. Keep trims or transitions on a separate line.

Related calculators

Browse measurement and estimating guides

Also searched as: 12x12 room flooring, flooring boxes per sq ft, flouring calculator

Related measurement guides