Plan seam positions for roll material

Compare strips with different orientations before ordering a roll.

By CalcForge ·

Method

Measure the usable roll width, then count strips needed across each layout direction. Multiply by strip length and include overlap or trimming required by the product.

Worked example

A 2.4 × 3.0 m surface covered with a 1 m-wide roll needs three 3 m strips with one orientation, or three 2.4 m strips if rotated and no overlap is needed.

What to check

Check whether seams can run across the shorter dimension and measure actual usable roll width.

Use the material calculator when the product is sold by area per pack.

Open the material pack calculator ↗