Separate sloped distance from map area
Know when a tape laid on a slope will overstate the area shown on a map.
By CalcForge ·
Method
Sketch a cross-section and distinguish horizontal run from along-ground length. Use horizontal distances for a map-area estimate and preserve surface distances if recording material needs.
Worked example
A 5 m slope with a 3 m rise has a horizontal run of 4 m. For a uniform 10 m width, the plan and surface areas are 40 m² and 50 m² respectively.
What to check
A changing slope cannot be represented accurately by one cross-section. Use this for planning rather than legal boundaries.
Use the field calculator for the rectangular footprint, then apply this guide’s method to the result.