Estimate total water delivered by a drip zone
Combine the measured output of different emitter groups over one runtime.
By CalcForge ·
Method
Count emitters by flow rate. Multiply each group size by its measured typical L/h, sum the rates, then multiply by runtime in hours.
Worked example
Eight 2 L/h emitters and four 1 L/h emitters deliver an estimated 15 L over 45 minutes.
What to check
Individual output can change with pressure. Use field readings if you need a reliable estimate.
Use the field calculator for the rectangular footprint, then apply this guide’s method to the result.
Open the field area calculator ↗
Further reading: University of Minnesota Extension guide to auditing irrigation